🔧 Experimental
Create a short, repeating automation pattern when its Trigger Input receives a trigger note, this can be used to control other Nodes.
For example, to control the gain setting of a Gain Node, click Automate from input on the Gain Node’s gain setting, then connect the Envelope Trigger Node to the gain control input.
Settings
In addition to the settings listed below, this Node also defines a repeating Envelope that can be edited from Node properties.
See Using the Envelope Editor for more information.
Loop
When enabled, the sequence will repeat as long as the triggering note is held.
Envelope duration
Only available when Loop is enabled. Sets the duration over which the envelope is played before repeating.
De-click
When set, “clicks” are removed from the output by applying small amounts of smoothing.
Outputs
Control Output
The current envelope value.
Node conversions
Node conversion is available from the node menu.
Convert to: Envelope Pattern
When converting, control points are transferred to the new Envelope Pattern Node as well as the control points. No timeline segments will be added.